ColorPrint Aurora®
Print and Cut and Color-Shift, Too!
Searching for a way to add some color-shifting surrealness to your full-color images? Look no further than ColorPrint Aurora™!
This iridescent film gleams in the light as the material moves, appearing to change color right before your eyes!
Made with the same glistening, woven finish as our Aurora HTV line, this material has the added benefit of working with Solvent, Eco-Solvent, and UV printer systems! If you want your printed images to be as jaw-dropping as the Northern Lights, then ColorPrint Aurora is the Digital Media for you!
ColorPrint Aurora is a PU composition.
Not compatible with inkjet, toner, or sublimation printers.
CPSIA Certified
Available Colors
FABRIC COMPATIBILITY
100% Cotton
100% Polyester
Cotton / Poly
Technical Information
Roland® VersaCamm SP-300i:
Blade: 45°
Force: 150-180 gf
Offset: .250
Speed: 30 cm/s
Roland® TrueViz SG300:
Blade: 45°
Force: 150-180 gf
Offset: .250
Speed: 30 cm/s
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
• Print, cut, and weed your design.
• Mask with TTD High Tack Mask
• Cover design with Heat Transfer Cover Sheet
• Apply design at 305°F / 150°C with medium pressure for 10-15 seconds
• Peel carrier warm (5-10 seconds off the press)
Click here for a printable version of all digital media application instructions
Recommended Accessories:
Siser Weeder, EasySqueegee, TTD High Tack Mask
Laundering: Wait 24 hours before first wash. Machine wash cold. Tumble Dry low. Do not bleach or dry clean.