Brick® 600
Our thickest heat transfer vinyl - that's easy to cut and apply!
Thin or thick, materials of all sizes have a place in garment decorating. Brick 600 heat transfer vinyl by Siser® is a 600 micron thick, flexible heat transfer vinyl that’s designed for smaller logos and designs to add extra dimension to your garments. Brick 600’s matte finish looks great on caps, bags, and is ideal for left chest logos. This trendy look can be seen on sports apparel all over the globe. When used as a base layer and covered with EasyWeed®, the combination gives a great embossed look. The next time you feel your design could benefit from a boost in height, consider giving it some dimension with Brick 600 by Siser! Brick 600 is a PU composition.
CPSIA Certified | OEKO-TEX® Standard 100 | VeganOK | REACH Compliant
Available Colors
White
Silver
Gray
Black
Red
Vegas Gold
Texas Orange
Orange Soda
Yellow
Green
Royal
Navy
Citrus
Fl. Orange
Fl. Pink
Fl. Blue
Fl. Blue
Fl. Yellow
FABRIC COMPATIBILITY
100% Cotton
100% Polyester
Poly / Cotton
Technical Information
Blade: 45°/60° Force: 5-10 Offset: .250 Speed: 10
Click here to download a .pdf of settings for other cutters.
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
Heat Press Instructions
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 310°F/155°C
• Use medium pressure for 20 seconds
• Peel carrier cold
Click here for a printable version of all HTV application instructions
Recommended Accessories:
Siser Weeder, Multipurpose Paper or Heat Transfer Cover Sheet
Laundering:
Wait 24 hours before first wash. Machine wash cold with mild detergent. Tumble dry low. Do not dry clean.
Liquid fabric softener not recommended.