StripFlock® Pro
The only flock in the industry that can be layered on itself!
A great alternative to embroidery, StripFlock Pro heat transfer vinyl gives logos a raised, textured, suede-like feel. The fuzzy opaque colors make StripFlock Pro excellent for retro designs like you'd find in a mall in the 80's, or anytime you want a deep, rich look. StripFlock Pro is thick enough to cover hat seams, yet also looks excellent on bags, denim, and other garments that need textured visual interest. Use Stripflock Pro as a base layer and cover with other materials such as EasyWeed® EcoStretch™ for an embossed look, or layer with more StripFlock! The ability to layer this material with itself and others allows you to say “yes” to multi-color designs. StripFlock Pro is 410 Microns / 16.1 mils and is a PVC composition.
CPSIA Certified | OEKO-TEX® Standard 100 | VeganOK | REACH Compliant | CA Prop 65
Available Colors
White
Gray
Anthrecite
Black
Brown
Burgundy
Red
Bright Red
Orange
Yellow
Lemon
Fresh Mint
Green
Pale Blue
Turquoise
Royal
Navy
Purple
Fuchsia
Light Pink
FABRIC COMPATIBILITY
100% Cotton
100% Polyester
Cotton / Poly
Leather
Technical Information
Blade: 45°/60° Force: 20-25 Offset: .250 Speed: 10
Blade: 45°/60° Force: 15-20 Offset: .250 Speed: 10
Click here to download a .pdf of settings for other cutters.
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
Home Iron Instructions:
• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)• Press each section of design for 15 seconds
• Peel carrier warm
• If areas of design lift after application, replace cover sheet and re- press for 5-10 seconds
Heat Press Instructions:
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 310°F/155°C (EasyPress® users add approx. 30°)
• Use medium pressure for 15 seconds
• Peel carrier warm(at least 10 seconds off the press)
Recommended Accessories:
Siser Weeder, Multipurpose Paper or Heat Transfer Cover Sheet
Laundering:
Wait 24 hours before first wash. Machine wash cold with mild detergent. Dry on normal dryer setting. Do not dry clean.
Liquid fabric softener not recommended.