EasyReflective®

The easiest reflective HTV you’ve ever used!

EasyReflective is Siser®’s reflective HTV that weeds just like EasyWeed®! This highly-reflective heat transfer vinyl is truly an exceptional material, due to its glass bead construction that illuminates in the darkest of conditions. The frosted pressure sensitive (sticky) carrier even allows you to re-stick lifting material or replace a piece that’s accidentally weeded away.

With a low application temperature and simple warm peel, EasyReflective can be applied to all kinds of garments and accessories that need to stand out in low lighting. Heat apply EasyReflective with a heat press or home iron for increased visibility on sports garments, pet clothes, construction crew uniforms, and more! EasyReflective is a PU composition.

CPSIA Certified | CA Prop 65

Laser FriendlyCan be used as a top layer on other materialsHome-iron friendly140 microns
EasyReflective design on a black shirt
Closeup of EasyReflective design and roll

         Available Colors

EasyReflective Silver

Silver

EasyReflective Dark Gray

Dark Gray

EasyReflective Aqua

Aqua

EasyReflecive Rainbow Black

Rainbow Black

FABRIC COMPATIBILITY

Nylon

Nylon

Applies to 100% cotton

100% Cotton

Applies to 100% polyester

Polyester

Applies to cotton / polyester blends

Poly / Cotton

Technical Information

romeo-juliet.webp__PID:c7d40a99-c289-4061-b6f3-11b96ccdeb30

Blade: 45°/60° Force: 5-10 Offset: .250 Speed: 10

Click here to download a .pdf of settings for other cutters.

Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Home Iron Instructions:
• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds • Peel carrier warm
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds

Heat Press Instructions:
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C (EasyPress® users add approx. 30°)
• Use medium pressure for 10-15 seconds
• Peel carrier warm (5-10 seconds off the press)

Click here for a printable version of all htv application instructions

Recommended Accessories:
Siser Weeder, Multipurpose Paper or Heat Transfer Cover Sheet

Laundering: Wait 24 hours before first wash. Machine wash warm or cold with mild detergent. Dry on normal dryer setting. Do not dry clean.

Liquid fabric softener not recommended.

Informational Video