Crackle
3 spectacular finishes in 1!
Can't decide between Glitter, Holographic, or EasyReflective®? Get all 3 finishes with Crackle HTV! This ambitious material features holographic colors that shift in the light with silver glitter flakes inbetween. It even reflects light brilliantly, ensuring your designs stand out even from afar! And if that wasn't enough, Crackle also features a built-in snakeskin pattern, granting even more visual interest. When you need an HTV with more than one special effect, Crackle is the easy choice to make!
CPSIA Certified | CA Prop 65
Available Colors
Silver
Black
Red
Gold
Green
Blue
Pink
FABRIC COMPATIBILITY
100% Cotton
100% Polyester
Cotton / Poly
Technical Information
Blade: 45°/60° Force: 20-30 Offset: .250 Speed: 10
Click here to download a .pdf of settings for other cutters.
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
Home Iron Instructions:
• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium pressure (do not slide iron)
• Press each section of design for 15 seconds
• Peel carrier cold
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
Heat Press Instructions:
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C (EasyPress® users add approx. 30°)
• Use medium pressure for 15 seconds
• Peel carrier cold
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
Click here for a printable version of all HTV application instructions
Recommended Accessories:
Siser Weeder, Multipurpose Paper or Heat Transfer Cover Sheet
Laundering: Wait 24 hours before first wash. Machine wash cold with mild detergent. Tumble dry low. Do not dry clean.
Liquid fabric softener not recommended.