Sublimation on a 100% Cotton T-Shirt with Siser® EasySubli HTV
If you’re looking to print and cut full color images without breaking the bank, EasySubli® HTV is the decoration solution for you! Gradients, patterns, and portraits are all within reach when you have the HTV that bridges the gap between sublimation and colored polyester, cotton, rayon, and many more! Available through a select variety of authorized distributors, please email us at Info@SiserNA.com if you’re interested in purchasing information.
Now before you go out and buy up the whole lot, there’s a few more things we recommend having on hand to achieve best results with EasySubli HTV.
EasySubli HTV Companion Products
- Sawgrass Virtuoso SG400 printer* (SG400 discontinued for SG500)
- Siser® EasySubli Inks by Sawgrass**
- EasySubli Mask***
- Cricut Explore Air 2 (other Explore and Maker models are also compatible)****
- Cricut EasyPress or heat press
*Also compatible with the Sawgrass Virtuoso SG800 (SG800 discontinued for SG1000) desktop sublimation printer.
**Other brands of sublimation inks and printers may work, but they will require trial and error testing. Siser has partnered with Sawgrass to develop special inks and a profile for the greatest print quality with the least hassle.
***EasySubli Mask is not always necessary. Mask is only required when designs have multiple pieces that need to be kept in alignment.
***Other brands of cutters can be used with EasySubli as well. Read the Silhouette Cameo 3 post here! Read the Brother ScanNCut post here!
These last few items are likely already in your craft arsenal, but were necessary to complete this project:
- Siser Weeder
- 100% Cotton T-Shirt (Any color!)
- Parchment Paper (AKA Butcher Paper)
Typically, sublimation inks are only compatible with light colored polyester fabrics. If I tried to use traditional sublimation paper on this colored cotton t-shirt, the results would not be favorable. Not to worry though! Siser has your back with EasySubli heat transfer vinyl and we’re going to walk through all the steps to working with this new product right now!
Step 1: Set up Your Print & Cut File in Cricut Design Space
If you’ve made stickers, cupcake toppers, or any other kind of paper craft, you might already be familiar with creating a print and cut file in Cricut Design Space. For those of you just learning, here’s how it’s done.
1. Start a “New Project” in Cricut Design Space.
2. Upload your .jpeg or .png file and select “Simple”, “Moderately Complex”, or “Complex” depending on the level of detail in the image.
3. Select and erase any areas of the image that you do not want printed. For .jpegs this is usually just the white background. However, most .png’s have a transparent background (indicated by the gray and white checkers) and no areas to erase.
4. Select “Continue”, title your file, add tags if you’d like, and be sure to save the image as a “Print Then Cut” file.
5. When your image appears in Canvas, you may need to resize it. Cricut only allows for 9.25″x6.75″ of printing space.
6. Select “Make It” when your image is sized as needed. Ensure the “Mirror” slider is NOT on and “Continue” to printing. You’ll notice Cricut recognizes the print and cut file and automatically adds a black box around the image. This box is the registration mark that that will help tell your blade where to cut.
Step 2: Print on EasySubli HTV with the Sawgrass Virtuoso SG400 Desktop Sublimation Printer
If you have a new printer, follow the installation instructions for Siser EasySubli Inks by Sawgrass. If your printer is currently utilizing another type of ink, please contact Sawgrass Customer Support for further guidance.
1. Place EasySubli in printer tray so the glossy side is facing up.
2. Add a Bleed if needed. This can depend on your artwork, but in most cases I like to enable the “Add Bleed” slider. A bleed adds a little extra printed space so the blade has a margin for error during cutting. You’re less likely to end up with unintentional white spaces with a bleed.
3. Select “Virtuoso Print Manager” (AKA “VPM”)* from the list of possible printers and wait for the Settings window to appear. This is a very important step! Sending to the VPM allows you to adjust the print profile. Selecting “Sawgrass SG400” instead of VPM is not recommended and can result in a saturated output that’s not ideal.
*After this blog post was first created, “Virtuoso Print Manager” has been updated to simply “Sawgrass Print Manager” or “Print Manager” and will be referred to as such or “PM” for the rest of this blog post. 
4. Select “Siser EasySubli Vinyl” from the “Substrate” and “Paper” drop downs. Additionally, make sure the “Mirror” box is NOT checked. If these options are not available, you may be running an older version of PM.
5. If your print preview does not appear due to a layout or sizing error, go to the “Layout” tab in PM and check the “PM Performs Layout” box.
6. Select “Print” in PM and listen for the tell tale sounds of the SG400/SG800 sucking in a sheet of EasySubli HTV to get this printing party started!
7. Carefully remove the printed sheet from the tray to avoid smudging the damp inks and set aside to air dry for 30 minutes. Damp inks and over saturated prints can prevent EasySubli Mask from bonding properly so this step is especially important if you plan to use the mask.
The drying process can be sped up by placing the printed sheet under a Clam Shell Heat Press (that is open, on, and heated up) for 60 seconds. The residual heat will do the work of 30 minutes in just 1! With this drying method you may notice the colors begin to develop a little under the heat. This is normal and will not effect the overall vibrancy of the end result.
However, it is NOT RECCOMENDED to use the quick dry method if you are using a drawer style or swing away style Heat Press. The residual heat is too close to the HTV on these types of presses and may activate the adhesive on the back therefore bonding it to the liner and making masking almost impossible.
If your design is one big piece that doesn’t need to be cut (or it can be hand cut), then there’s no need to dry or mask it. However, be very cautious when removing printed EasySubli from the backing and transferring to your garment to prevent smudging the inks. If you’re in this boat, you can skip the next two steps and move onto Step #5: Heat Application!
If your design is like mine and it’s made up of multiple pieces, then it’s cutting time…on the next page that is.
Step 3: Cut EasySubli HTV with the Cricut Explore Air 2
1. Position EaySubli HTV on the standard grip cutting mat. We don’t need this HTV slipping and sliding around while cutting, so a (mostly) clean standard grip cutting mat is going to work best.
2. Load the cutting mat into the Cricut as usual. The optical eye is located under the blade carriage (indicated by red arrow) and can be seen as a white light when in use. Before cutting, the machine will read the registration mark (the large black box around the image) so you want to make sure there’s ample space in the front and back of the Cricut so the mat can feed back and forth without disruption.
3. Adjust the Smart Set Dial to “Iron On” and press the flashing green button to start cutting! Prior to cutting a full design, we always recommend performing a test cut. It’s especially important if you’ve been using the same blade for a while and it’s gotten dull or if you’re using a brand new blade that’s very sharp. In these cases, it’s likely you’ll have to stray from our recommended settings. Check out this post for instructions on test cutting and how to determine a good cut and setting.
Step 4: Weed and Mask EasySubli HTV
1. Use a weeding tool to separate a corner of the EasySubli HTV from the static backing. Weed carefully because the static backing is not sticky like an EasyWeed® carrier! After removing the outer excess, pick out the inner cavities.
2. Grab a sheet of EasySubli Mask and separate it from it’s aerated backing. EasySubli Mask is different than TTD Masks and cannot be used interchangeably.
There’s several methods to masking and you can do whatever feels most natural to you. Some prefer to lay the mask on top of the HTV and others prefer to lay the HTV on to the mask. Some like to start from the center and some like to start from an edge. All up to you!
3. Apply firm pressure with a squeegee to bond the heat transfer vinyl to the Mask so the static backing can be removed. If you want to save the design for later, re-stick it to the EasySubli Mask liner. We recommend applying EasySubli HTV within 24 hours of printing.
If you’re not storing your transfers for later, then EasySubli HTV is ready for heat application.
Step 5: Apply EasySubli HTV with the Cricut EasyPress
1. Set the Cricut EasyPress temperature to 345°F and the timer to 15 seconds. We recommend increasing the temperature when using an EasyPress since it does not hold consistent heat as long as a standard heat press will (note the 325°F temperature pictured below) and lower heat can effect the overall appearance of the end result.
2. Lay your garment on a solid surface (like a wooden table or cutting board) or on the EasyPress Mat. If using a mat, make sure the collar and shoulder seams hang off the edges so you can apply proper pressure.
3. Pre-press the t-shirt for about 5 seconds. This removes wrinkles and moisture from the shirt as well as pre-shrinks the cotton slightly. A pre-press helps prep the fabric for the best possible bond with EasySubli HTV.
3. Center EasySubli HTV and place parchment paper on top. This step is especially important if you’re not using EasySubli Mask. Since EasySubli uses sublimation inks, they will still go through the process of turning into a gas and coming back to a solid. This process sometimes results in a light ghost image transferred to the Mask. Parchment paper is a cost effective way to block the ghost image from transferring to the EasyPress’ heat plate or heat transfer cover sheet (and every project thereafter…)
4. Press firmly with the EasyPress for 15 seconds at 345°F with medium pressure. That’s at least 40°F cooler than infusible inks!
Rodeo Style (one handed) is not recommended, but sometimes necessary for picture taking purposes.
4. Peel EasySubli Mask warm if it’s there. Otherwise, your newly sublimated 100% cotton shirt is ready to be gifted!
For long lasting color and quality:
- Wait 24 hours before first laundering
- Turn garment inside out
- Machine wash cold with mild detergent
- Machine dry on a low heat setting
- Do not dry clean or use bleach
Let’s take a moment to appreciate that color development one more time…wow!
Questions, comments, concerns? I’d love to hear your feedback in the comments down below!
For those who learn better from videos, we’ve got you covered! Click here to watch EasySubli HTV in action.
I know we covered a lot more information in this post than usual, so make sure you can come back and easily find it again by pinning the image below to your Pinterest boards.
